Program; G.2.2 Program - TESTO 340 Instruction Manual

40
Measuring:
1 Start measuring:
- The readings are displayed.
Option:
Interrupt measurement and rinse sensors:
Continue measurement:
2 Stop measuring:
Options:
To print readings:
To save readings:
- The readings from the flue gas measurement, as well as any readings taken over
into the menu
ted in a measurement protocol (automatic furnace data are not printed).

G.2.2 Program

Five flue gas measuring programs can be set, saved and run.
Calling up the function:
Measurements
Ý
Changing a measuring program:
1 Select the program Ý
2
Meas rate
Ý
3 Repeat step 2 for the other criteria accordingly.
4
OK Save input
Running a measuring program:
1 Select the program Ý
2 Select
Start without zeroing
or
Start with zeroing
- If selected: Gas zeroing (32 s).
- Stabilisation phase (60 s).
- The program will run and then stop after the programmed time.
Option:
To print readings:
To cancel the program:
.
Start
Gas
.
Stop
Print .
.
Save
from other measurement functions are stored and/or prin-
Flue Gas
OK
Ý Ý
Change
Change Ý Enter the values Ý
OK .
Ý
Start .
(only available if gas zeroing has already been carried out)
and start the program with
.
Print
Stop
.
OK .

Program

Ý
.
OK .
, start again:
Air ,
.
OK
Start .