20
E.4.2 Calling up the function
Functions which cannot be selected because the required sensor/probe is not
connected are shown in grey type.
1 Select function:
- The selected function is shown with a grey background.
2 Confirm selection:
- The selected function is opened.
E.4.3 Entering values
Some functions require values (numbers, units, characters) to be entered. Depending
on the function that is selected, the values are entered via either a list field or an input
editor.
List field
Input editor
,
.
.
OK
1 Select the value to be changed (number, unit):
2 Adjust the value:
3 Repeat steps 1 and 2 as required.
4 Confirm the input:
5 Save the input:
1 Select value (character):
2 Accept the value:
Options:
3 Repeat steps 1 and 2 as required.
4 Save the input:
,
.
,
OK
OK Save input
OK
Switch between uppercase/lowercase letters:
(not always available).
A <=> a
Delete character:
<=
To position the cursor in the text: Select the text
input field:
,
and position the cursor:
,
.
To delete character in front of the cursor:
Del
.
OK Save input
.
.
OK
.
Ý
,
,
,
.
.
OK
.
Ý
.