Measuring Program (435-2/-4 Only) - TESTO 435 Series Instruction Manual

Protocol
Saved measurement protocols can be printed out on a Testo printer (accessory
part) via the infrared interface.
Printing a a m m easurement p p rotocol:
The main menu is open, Menu is displayed.
Memory
OK
1
Press /
2
Press to start printing out the measurement protocol.
3
Delete
The entire memory with all measurement protocols can be cleared.
Clearing t t he m m emory:
The main menu is open, Menu is displayed.
Memory
1 OK
Press to clear the entire memory.
2 OK

6.2.2 Measuring program (435-2/-4 only)

A measuring program can be programmed and activated/deactivated:
Designation
Off
AUTO
Turb
Deactivating a a m m easuring p p rogram:
The main menu is open, Menu is displayed.
Meas.Prog
1
Press /
2
- The instrument returns to measurement view.
Protocol
OK
to select the measurement protocol that is to be printed.
Delete
OK
Description
Measuring program switched off: Readings can be stored manually
Automatic measuring program: The measuring cycle (min. 1s) and the number of
readings can be set freely.
Automatic measuring program for measuring turbulence (only if a turbulence probe
is available and plugged in): The measuring cycle (1/5s) and duration (180s) are
preset.
.
OK
to select Off and confirm with
6. Setting the instrument 51
.
.
.
OK