Program; G.2.2 Program - TESTO 340 Instruction Manual

Measuring:
1 Start measuring:
- The readings are displayed.
Option:
Interrupt measurement and rinse sensors:
Continue measurement:
2 Stop measuring:
Options:
To print readings:
To save readings:
- The readings from the fl ue gas measurement, as well as any readings taken over
into the menu
Flue Gas
ted in a measurement protocol (automatic furnace data are not printed).

G.2.2 Program

Five fl ue gas measuring programs can be set, saved and run.
Calling up the function:
Measurements

Changing a measuring program:
1 Select the program 
2 Change
Meas rate

3 Repeat step 2 for the other criteria accordingly.
4 OK
OK Save input

Running a measuring program:
1 Select the program 
2 Select
Start without zeroing
or
Start with zeroing
- If selected: Gas zeroing (32 s).
- Stabilisation phase (60 s).
- The program will run and then stop after the programmed time.
Option:
To print readings:
To cancel the program:
.
Start
.
Gas
Stop .
.
Print
Save .
from other measurement functions are stored and/or prin-
OK

Program

 
Change .
Enter the values 
.
Start .
(only available if gas zeroing has already been carried out)
and start the program with
.
Print
Stop , start again:
Testo-Direct
www.
,
Air
.
OK

OK .
OK .
Start .
1.800.561.818
.ca
39