Installing And Connecting Fsl-Con; Trol Ii - Trox Technik FSL-CONTROL II Installation And Configuration Manual

3.2.5 Installing and connecting FSL‑CON-

TROL II

Step 1: Download the FSL‑CONNECT software
1. On the TROX website http://www.trox.de find the
search field, enter 'FSL
respective product page.
2. On the product page select 'DOWNLOADS ->
Software -> Configuration software
‑ CONNECT' .
FSL
3. Enter your contact data into the form and click
'Send' .
ð You will then receive an e-mail with the link to
download the software.
If you do not receive an e-mail with the link,
check your spam filter settings.
FSL‑CONNECT software > Installing and connecting FSL‑CONTROL II
‑ CONTROL' and open the
Single room control system FSL‑CONTROL II
Control of ventilation units
Step 2: Requesting the licence key
1. Select 'DOWNLOADS -> Software -> Licence key
‑ CONNECT' .
request FSL
2. Enter your contact data into the form and click
'Send' .
ð You will then receive an e-mail with your per-
sonal activation code.
If you do not receive an e-mail with the link,
check your spam filter settings.
Step 3: Installing the software
Unzip the ZIP archive you have just downloaded
and install the software.
35