Trox Technik FSL-CONTROL II Installation And Configuration Manual page 31

FSL‑CONNECT software > Setting control temperatures and operating times (commissioning wizard, or ...
3.2.2.3.3 Transferring configuration parameters
Fig. 22: Transferring configuration parameters
After setting control temperatures
Ä Chapter 3.2.2.3 'Operating hours ' on page 29, select 'Start transmission' to send the parameters to the ventila-
tion unit.
After the parameters have been sent, the ventilation unit has to be restarted. To restart the unit, go to the 'Expert
functions' menu and select 'Restart unit' .
Documentation of configuration settings
You may save the configuration settings as PDF. To do so, go the 'File' menu and select 'Save configuration
settings in PDF format' .
Ä Chapter 3.2.2.1 'Control temperatures' on page 26 and operating times
Single room control system FSL‑CONTROL II
Control of ventilation units
31