Table of Contents
Advertisement
3.2 FSL‑CONNECT software
The FSL-CONNECT software can be used to adjust the
preset control parameters. It can also be used for main-
tenance. The software is available for download from
the TROX website. Using the software requires an acti-
vation code, which you will receive by e-mail once you
have registered. Enter the licence code when you start
the software for the very first time.
You need a connecting cable to connect a PC to
FSL‑CONTROL II.
Fig. 17: Adapter and connecting cable
① USB-RS485 adapter with driver software (replace-
ment part no. M536ED7)
② Connecting cable with RJ45 and 9-pole DSUB
socket (replacement part no. M516SM3)
For more information on how to connect the control
system to a PC and on how to install the software
Ä Chapter 3.2.5 'Installing and connecting
see
‑ CONTROL II' on page 35
FSL
Single room control system FSL‑CONTROL II
Control of ventilation units
FSL‑CONNECT software
23
Advertisement
Table of Contents
Need help?
Do you have a question about the FSL-CONTROL II and is the answer not in the manual?