Table of Contents
Advertisement
Control of ventilation units
FSL‑CONNECT software > Basic settings
3.2.4 Basic settings
Changing the language
‑ CONNECT main menu, 'Options'
Fig. 25: FSL
To set the dialogue language go to the 'Options' menu and select 'German' or 'English' .
Changing units of measure
To set or change the unit of measure for volume flow
rate or temperature, go to the 'Options' menu and
select the unit of measure you want to set or change.
Changing the licence key
To enter the licence key, go to the 'Options' menu and
select 'Change licence key' . Then enter the licence key
and accept it.
34
Single room control system FSL‑CONTROL II
Advertisement
Table of Contents
Need help?
Do you have a question about the FSL-CONTROL II and is the answer not in the manual?