10.2 Trademarks
All product names mentioned in this document are subject without restriction to the respective
applicable trademark laws and are the property of the respective owners.
All brands, trade names or company names may be registered trademarks and are the property of
the respective owners.
Should trademarks used in this document fail to be explicitly identified as such, this does not justi
fy the conclusion that the denotation in question is free of third-party rights.
10.3 CE Conformity
This product meets the requirements of the European Directive 93/42/EEC for medical devices.
This product has been classified as a class I device according to the classification criteria out
lined in Annex IX of the directive. The declaration of conformity was therefore created by the man
ufacturer with sole responsibility according to Annex VII of the directive.
11 Appendices
11.1 Symbols Used
Declaration of conformity according to the applicable European directives
In some jurisdictions it is not permissible to dispose of these products with unsor
ted household waste. Disposal that is not in accordance with the regulations of
your country may have a detrimental impact on health and the environment. Please
observe the instructions of your national authority pertaining to return and collec
tion.
Lot number
Legal manufacturer
11.2 Operating states/error signals
11.2.1 Status signals
Charging
Status
receptacle
Battery fully charged
Battery 50% charged
Battery empty
11.2.2 Beep signals
The following beep signals are set by default:
Beep signal
1 x long
20 | Ottobock
Additional display
-
Status
•
Turn off prosthesis on charging receptacle
•
Charging begins (charging plug connected
to charging receptacle)
•
Charging ends (charging plug disconnected
from charging receptacle)