Developing Applications; Programmable Options - Infinite Peripherals Linea Pro 5 Series User Manual

DEVELOPING APPLICATIONS

Software is not provided with your Linea Pro 5. Please contact your reseller or Infinite Peripherals for
Third Party software solutions.
Integrating the Linea Pro 5 into your iOS application requires the use of the Infinite Peripherals
Universal SDK. The SDK incorporates an API specifically for developing applications to use Linea Pro
5 functionality.
For additional details on using the Infinite Peripheral Universal SDK, please refer to the appropriate
SDK documentation.
For the latest Infinite Peripheral Universal SDK please visit our developer portal:

PROGRAMMABLE OPTIONS

Optional settings for the Linea Pro 5, which can be configured via the SDK include:
Programmable Options
Charging Current
Set Charging
Enable Scan Button
Scan Mode
Pass Through Sync
Idle Time
Linea Pro 5 User Manual
UM-00025 Version: A
developer.ipcmobile.com/
Charging current may be set to 500mA (default) or 1A
The Linea Pro 5 can charge the iPod/iPhone using its internal battery
by enabling the "setCharging" setting. When the Linea Pro 5 battery is
above 20%, it will then start to charge the iPod/iPhone battery
In order to scan, the Enable Scan Button must be set in the SDK.
Linea Pro 5 supports the following Scan modes:
• Single Scan
Scanning a single barcode by pressing and releasing the Scan but-
ton.
• Multi Scan
Scanning multiple barcodes by pressing and holding the Scan but-
ton.
• Motion-Detect
Scanner is activated automatically when barcode is placed near the
barcode engine.
• Multi-Scan without Duplicates
Scanning multiple barcodes without duplicates.
When the pass through sync setting is enabled and the USB cable is
plugged in, the iPhone 6 may be synced with a PC or MAC.
When syncing is required, enable the Pass through Sync setting in the
SDK. When this option is selected and the USB cable is plugged in, the
Linea Pro 5 will disconnect and the user will no longer be able to scan.
In order to use the scanner again, the USB cable must be removed.
Default setting is 5400 seconds (90 minutes).
Description
Page 14 of 31