Magnetic Stripe Reader (Msr) - Infinite Peripherals Linea Pro 5 Series User Manual

Magnetic Stripe Reader (MSR)

The Linea Pro 5 has a built-in magnetic stripe reader. The MSR incorporates a 3-track, bi-directional,
encryption-capable magnetic read head. A single swipe can read field data from all three tracks.
The MSR will function as an unencrypted MSR until an encryption key is injected into the MSR
head by a designated Infinite Peripherals key injection facility. Please contact an Infinite Peripherals
account representative for more information.
To use the Magnetic Stripe Reader
1. Press the Scan button to activate the Linea Pro 5.
2. Insert the card into either end of the reader with the magnetic stripe face up, then swipe the card
through toward the other end of the reader.
Keep the edge of the card flat on the inner edge of the reader to ensure that the magnetic stripe
passes over the read head evenly.
Linea Pro 5 User Manual
UM-00025 Version: A
Swipe direction
Figure 11: Magnetic Stripe Reader
Page 19 of 31