Developing Applications For Your Infinea X Mini; Programmable Options - Infinite Peripherals INFINEA X mini User Manual

DEVELOPING APPLICATIONS FOR YOUR INFINEA X Mini

Software is not provided with your Infinea X Mini. Please contact your reseller or Infinite Peripherals for
Third Party software solutions.
Integrating the Infinea X Mini with your iOS application requires the use of the Infinite Peripherals
Universal SDK. The SDK incorporates an API specifically for developing applications to use the barcode
scanner, magnetic strip and contactless reader functionalities of the Infinea X Mini.
For additional details on using the Infinite Peripheral Universal SDK, please refer to the SDK's
documentation.
For the latest Infinite Peripheral Universal SDK please visit our developer portal at:

PROGRAMMABLE OPTIONS

Below are some optional settings for the Infinea X Mini which can be configured via the SDK.
Programmable Options
Charging Current
Scan Mode
Pass Through Sync
Time Out
Battery Sharing
Infinea® X Mini User Manual
UM-00013 Rev B
developer.ipcmobile.com
Charging current may be set to 500mA or 1A (default)
The Infinea X Mini supports the following Scan modes:
• Single Scan
Scanning a single barcode by pressing and releasing the Scan button.
• Multi Scan
Scanning multiple barcodes by pressing and holding the Scan button.
• Motion-Detect
Scanner is activated automatically when barcode is placed near the
barcode engine.
• Multi-Scan without Duplicates
Scanning multiple barcodes without duplicates.
When the pass through sync setting is enabled and the USB cable is
plugged in, the iPad mini may be synced with a PC or MAC. Default
setting is "OFF".
Set timeout for 60 or up to 5400 seconds (default).
When enabled through the SDK, the Extended Battery will charge the
iPad mini 4 for up to two (2) hours, provided at least 5% of the battery's
charge remains. Battery Sharing will stop when the Extended Battery's
charge falls below 10%.
Note: Battery Sharing feature available only for Infinea X Mini P/N: IX-I2DBTR-M4-XXX
using an Extended Battery.
Description
Page 9 of 31