Reflecting The System Mode Settings In The Printer - Toshiba B-EX Series Key Operation Specification

DIAG.
PARAMETER SET
ADJUST SET
TEST PRINT
SENSOR ADJUST
RAM CLEAR
INTERFACE
BASIC
FOR FACTORY
RFID
RTC
Z-MODE
USB MEMORY
RESET

8.2 REFLECTING THE SYSTEM MODE SETTINGS IN THE PRINTER

The settings configured in the system mode or user system mode are saved in the printer at the following timing,
depending on the items to be saved.
・ Periodic save at 20-msec. interval
When Reset menu in the system mode or user system mode is performed
・
The changes in the settings, with a partial exception, take effect at a power on time or after a reset.
Used to perform self diagnosis, print out the result, check for the print head
broken elements.
Used to set the parameters for each printer function.
Used to fine adjust the printer mechanism position and sensor.
Used to conduct test print by printing slant lines, characters and barcodes.
Used to display the ambient temaprature and print head temparature, and adjust
each level of the media sensor.
Used to clear the maintenance counter and parameters.
Used to set the parameters of the interface such as network, USB, RS232C and
parallel.
Used to set the function of the BASIC program when it is loaded printer.
Used to adjust the printer before shipment.
Used to set RFID-related parameters.
Used to set the date & time of the real time clock, enable or disable the low
battery check, and choose a real time renewal timing.
Same as BASIC.
Used to copy data to/from USB memory.
Used to reset the printer.
38