Back Adj - Toshiba B-EX Series Key Operation Specification

8.5.3 BACK ADJ.

Max. Min. value
value
9.9 -9.9
NOTE: There may be cases where a label is not returned to the home position depending on the print
conditions, even if a back feed, of which length is the same as the forward feed, is performed.
In issues where any paper sensor is used, if the label pitch length is almost the same as the
distance between the thermal print head and the paper sensors (75.5 mm), a label/tag may not
be returned to the home position when operations with a back feed (such as cut issues, strip
issues, automatic forward feed standby) are performed. It may result in an error. In such
cases, to prevent an error from occurring, the back feed length should be increased by
performing the back feed fine adjustment in the + direction.
Step Display
0.1 Decimal
+0.0mm
+3.0mm
-3.0mm
Sign Integer
digit
Exist 1
Print start position
(Home position after a back feed)
Print start position
(Home position after a back feed)
Print start position
(Home position after a back feed)
81
Decimal 0-padding
place
1 None
Unit of
measure
mm