System Mode; Outline Of System Mode - Toshiba B-EX Series Key Operation Specification

8 SYSTEM MODE

8.1 OUTLINE OF SYSTEM MODE

The printer enters the system mode when the following operation is performed when the printer power is off.
・ Turn on the printer while holding down the [FEED] and [PAUSE] keys at the same time.
Turn on the printer while holding down the [MODE] key.
・
The system mode is intended for performing self-test, parameter setting, and other settings.
When the top menu is displayed, the firmware version is shown on the right side of the title.
The language displayed on the panel is Japanese when Japanese is selected for the LCD language parameter,
and English when English, German, French, Dutch, Spanish, Italian or Portuguese is selected.
The key operations for the system mode are described below.
Key operations follow Section 7.1 LIST BOX WITH SCROLLBAR.
Display
Top menu for QM/CN model
<1>DIAG.
<2>PARAMETER SET
<3>ADJUST SET
<4>TEST PRINT
<5>SENSOR ADJUST
<6>RAM CLEAR
<7>INTERFACE
<8>BASIC
<9>FOR FACTORY
<10>RFID
<11>RTC
<12>Z-MODE
<13>USB MEMORY
<14>RESET
English
37