Toshiba B-FP Series Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Label Maker
  5. B-FP Series
  6. Manual
Toshiba B-FP Series Manual

Toshiba B-FP Series Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TOSHIBA Label Printer
BCP Setting Tool for iOS
B-FP Series Detail Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba B-FP Series

Summary of Contents for Toshiba B-FP Series

  • Page 1 TOSHIBA Label Printer BCP Setting Tool for iOS B-FP Series Detail Manual...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1. INTRODUCTION ............................1 UPPORTED PRINTERS OS ..............................1 UPPORTED 2. FUNCTION ............................2 ARAMETER CREEN [General] page ..............................4 [General (2)] page ............................8 [Device] page ..............................11 [LAN] page ..............................13 [WLAN] page ..............................16 [WLAN (2)] page ............................

  • Page 3: Introduction

    1. Introduction Thank you for purchasing the “BCP Setting Tool”, a setting tool for the label printers of Toshiba Tec Corporation (hereinafter referred to as “Toshiba Tec”). This document gives you a general description such as features for each model of the “BCP Setting Tool”...

  • Page 4: Function

    2. Function [Parameter] Screen You can configure and obtain various parameter settings of the printer. The data changed on each setting page are not retained when the screen returns to the top page of the [Parameter] screen. Use [Export to File] to save them. Page Group Item...
  • Page 5 You can use various functions by tapping the menu button in the upper right corner. [Get Parameter] You can obtain the parameter setting value from the selected printer and update the display. The parameter setting values are obtained from the printer for all pages, groups and items. Items to be changed from the currently displayed value are displayed in red.

  • Page 6: [General] Page

    [General] page [Image] group [Character Code] Selects a character code table to be applied to the printer font. Default PC-850 PC-850, PC-8, PC-852, PC-857, PC-851, PC-855, PC-1250, PC-1251, Options PC-1252, PC-1253, PC-1254, PC-1257, LATIN9, Arabic, PC-866, UTF-8 [Zero Font] Selects whether or not to attach a slash to the printer font character “0”. Note that no slash is attached to the following fonts, regardless of the settings.
  • Page 7 [Display] group [LCD Language] Selects the language of the message to display on the LCD. Default English English, German, French, Dutch, Spanish, Japanese, Italian, Portuguese, Options Simplified Chinese, Korean, Polish [Buzzer] Selects whether or not the buzzer sounds. Default Options OFF, ON [LCD Contrast] Selects the contrast of the LCD.
  • Page 8 [Adjustment] Group [Feed Position] Sets a fine adjustment value for the stop position in units of 0.1 mm. When the value is negative (-), the feed length to the stop position becomes longer. When the parameter is not retrieved, the PC value set by the Position Fine Adjust command [AX] becomes zero (0).
  • Page 9 [Power Save] Group [Time to the sleep mode] Sets a period of time from when the printer ceases to be used until it enters the sleep mode. The printer does not enter into the sleep mode when “0” is set. Default 003 (sec) Range...

  • Page 10: [General (2)] Page

    [General (2)] page [Command] group [Control Code] Displays the control code used for command analysis. This setting cannot be changed. Default AUTO Options AUTO, [ESC][LF][NUL], {|} [Print Command Mode] Selects the print command mode. Default TPCL TPCL, TPCL1, RECEIPT, RECEIPT1, LABEL, C Mode, ESC/POS, Z Mode, Options S Mode [BASIC] group...
  • Page 11 [Password] group [System Mode Password] Selects whether to enable or disable the password used for entering into the System mode. To set this field, the old password is required. When you enter an incorrect old password, you cannot change the password. Default Disable Options...
  • Page 12 [Power] group [Power off after error] Selects whether or not to turn the power of the printer off when an error has occurred. When “5 min” is set, the power is turned off when 5 minutes have passed after the error. Default 5 min Options...

  • Page 13: [Device] Page

    This name is used for detection by other devices. Enter up to 32 alphanumeric characters and spaces. Default TOSHIBA TEC BT [Inquiry] Selects whether or not to make a response to an inquiry from the host. When selecting “Enable (60 seconds)”, a response is made to an inquiry only within 60 seconds after the printer is turned on.
  • Page 14 [Inquiry/Page Interval] Sets an interval between responses to an inquiry or connection from the host. Connectivity may be improved by decreasing the value under the environment where connection takes time. However, if a smaller value is set, the power consumption of the printer is increased. (0.625 msec.

  • Page 15: [Lan] Page

    [LAN] page [TCP/IP] group [LAN I/F] Selects whether to enable or disable the LAN feature. Default Enable Options Disable, Enable, Config Mode [IP Address] Sets an IP address. Default 192.168.254.254 Range 0.0.0.0 to 255.255.255.255 [Subnet Mask] Sets a subnet mask. Default 255.255.0.0 Range...
  • Page 16 [Protocol] group [LPR] Selects whether to enable or disable the communication via an LPR protocol. Default Disable Options Disable, Enable [Socket] Selects whether to enable or disable the socket communication. Default Enable Options Disable, Enable [Port Number] Sets a port number used for the socket communication. Default 09100 Range...
  • Page 17 [DNS] group [Primary DNS server] Sets an IP address of the primary DNS server. Default 0.0.0.0 Range 0.0.0.0 to 255.255.255.255 [Secondary DNS server] Sets an IP address of the secondary DNS server. Default 0.0.0.0 Range 0.0.0.0 to 255.255.255.255 [SNMP Trap] group [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] Selects whether to enable or disable the SNMP trap.

  • Page 18: [Wlan] Page

    [WLAN] page [WLAN Detail] group [ESS ID] Sets an ESS ID. Up to 32 alphanumeric characters can be entered. Default TOSHIBATEC [Beacon Transmitting Interval] Selects an interval between transmissions to the beacon. Default 100 msec 100 msec, 200 msec, 300 msec, 400 msec, 500 msec, 600 msec, 700 msec, Range 800 msec, 900 msec, 1000 msec [Roaming Threshold Min]...
  • Page 19 [802.11abgn] group [AP Mode Channel] Selects a channel for IEEE 802.11a/b/g/n. However, channels which cannot be used due to the standard designation will be corrected by the printer. Default 1ch, 2ch, 3ch, 4ch, 5ch, 6ch, 7ch, 8ch, 9ch, 10ch, 11ch, 12ch, 13ch, 14ch, Options 36ch, 40ch, 44ch, 48ch, 149ch, 153ch, 157ch, 161ch, 165ch [Band select]...
  • Page 20 [Authentication] group [(1) Connection Mode] Selects the connection mode. Default Infrastructure Options AP Mode, Infrastructure [(2) Encryption] Selects the encryption scheme. Only the available options are displayed depending on the setting of [(1) Connection Mode]. Default Disable Options Disable, WEP40 [(3) Network Authentication] Selects the network authentication system.
  • Page 21 [WEP] group [Key Index] Sets the index of the WEP key to be used. Default Range #1 to #4 [Input Type] Selects the code for entering a WEP key. When the code is changed, the WEP key set is cleared. Default Options HEX, ASCII...

  • Page 22: [Wlan (2)] Page

    [WLAN (2)] page [WPA-PSK] group [Pre Shared Key] Sets a key to be used for WPA encryption in network authentication. Enter from 8 to 64 alphanumeric characters. Since the password is security information, it is displayed with hidden characters except when it is being entered.
  • Page 23 [Supplicant] group [Server Certificate] Selects the server certificate file to be transmitted from the folder of the selected printer. When no file is selected, data transmission is not performed. When selecting a blank file with no data, you can disable the current settings. [Client Certificate] Selects the client certificate file to be transmitted from the folder of the selected printer.

  • Page 24: [Z Mode] Page

    [Z Mode] page [Z Mode] group [Label length] Sets the label length used in the Z Mode in units of 1 dot. Default 02030 (dots) Range 00080 to 07999 (dots) [Label width] Sets the label width used in the Z Mode in units of 1 dot. Default 0432 (dots) Range...
  • Page 25 [Code setting] group [Control prefix (~)] Sets the character to be assigned to the control prefix used in the Z Mode with the HEX format. Default Range 20 to FF [Format prefix (^)] Sets the character to be assigned to the formatted prefix used in the Z Mode with the HEX format. Default Range 20 to FF...

  • Page 26: [S Mode] Page

    [S Mode] page [Print configuration] group [Sensor type setting] Selects the sensor type for the S Mode. Default Options I-MARK, GAP, Disable Sensor [Print Darkness] Selects the print darkness for the S Mode. Default Level5 Level1, Level2, Level3, Level4, Level5, Level6, Level7, Level8, Level9, Options Level10 [Zero Slash]...
  • Page 27 [Label configuration] group [Vertical Label Size] Sets the vertical label size for the S Mode. Default 01760 (dots) Range 00080 to 07984 (dots) [Horizontal Label Size] Sets the horizontal label size for the S Mode. Default 0432 (dots) Range 0080 to 0432 (dots) [Vertical Offset Value] Sets the vertical offset value for the S Mode.

  • Page 28: Download Screen

    Download Screen You can download the printer firmware program and BASIC program. Tap the function button you want to use to display the page for each function. Top page of the [Download] screen...

  • Page 29: [Firmware Download] Page

    Even when the printer can start up normally, download the firmware again. If the printer cannot start up, contact your Toshiba Tec sales representative. Furthermore, in the case of a Bluetooth connection, this will be disconnected due to the printer being rebooted after downloading.
  • Page 30  Adding a file By using the file-sharing feature or the [File] application, save the firmware file to the folder of the selected printer. (Refer to “iTunes file-sharing” in “3. Preparation” of the Basic Manual.) Then, select the firmware file you want to download for this product. Multiple files can be selected at the same time.
  • Page 31  Deleting a file Swipe the item to the left to delete the added firmware file from [ROM List]. When [Delete] is displayed, tap it.
  • Page 32  Downloading a file Tap the download button to start downloading. If the reading of the ROM file or the creating of download data has failed, an error message will be displayed. When the processing starts, the progress status screen is displayed. When the processing is completed, the completion screen is displayed.

  • Page 33: [Basic Download] Page

    [BASIC Download] page Be sure to avoid an environment where a power failure may occur in the middle of the downloading. If a power failure occurs during a downloading, retry the operation. Furthermore, in case of the Bluetooth connection, this will be disconnected due to a reboot of the printer after downloading.
  • Page 34  Allocating the memory You can select whether or not to allocate onboard memory for the printer. The [Memory Allocate] check box has been selected as the default. When the check box is selected, the contents of each registration area are cleared because allocation is executed.
  • Page 35 [Memory Allocate] [Bitmap External Character Storage Area] Sets the area size for storing bitmap external characters. Default 2304 kB Options 0 to 3200 kB (in units of 64 kB) [Retain BASIC Area] Sets whether or not to retain the BASIC file storage area by selecting [ON] or [OFF]. ON: The BASIC file storage area is not allocated and the existing data are retained.
  • Page 36  Selecting and adding files You can select and add BASIC files. One BASIC file can be registered in [Main Program] and [System Mode Program] and multiple ones can be registered in [Data File], respectively. [Start Block] Specifies the area of the printer where the main program, system mode program and data files are stored.
  • Page 37  Downloading a file You can download BASIC programs and perform the memory allocation. When the processing starts, the progress status screen is displayed. When the processing is completed, the completion screen is displayed. This function is executed only when the printer is in the online mode and in the idle state. This button is grayed out unless the above settings are properly configured.

  • Page 38: [Tools & Maintenance] Screen

    [Tools & Maintenance] Screen You can use other functions on the [Tools & Maintenance] screen. Tap the function you want to use. Top page of the [Tools & Maintenance] screen...

  • Page 39: [Self Diagnosis]

    [Self Diagnosis] You can obtain and save printer firmware information and maintenance counter information. [Firmware Info] Printer firmware information is displayed. The information will be updated to the latest data by tapping [Refresh]. [Maintenance Counter Info] The maintenance counter values are displayed. The information will be updated to the latest data by tapping [Refresh].

  • Page 40: [Send File]

    [Send File] You can send a specified file to the printer in a binary format. Save the file you want to send to the folder of the selected printer. The extension is “txt” only. (Refer to “iTunes file-sharing” in “3. Preparation” of the Basic Manual.) Then select the file you want to send and tap [Send].

  • Page 41: [Setting]

    [Setting] You can change the printer's memory setup and various settings.
  • Page 42  [Memory Allocate] You can allocate the memory. The sum of the memory size for each storage area shall be equal to the total onboard memory size. If they do not match, the printer automatically adjusts the size. Priority: Bitmap External Character > BASIC File > Form > Graphic > PC Save After the allocate command is sent to the printer, this product waits for the end of the memory allocation.
  • Page 43 [Memory Allocate] [Bitmap External Character Storage Area] Sets the area size for storing bitmap external characters. Default 2304 kB Options 0 to 3200 kB (in units of 64 kB) [Retain BASIC Area] Sets whether or not to retain the BASIC file storage area by selecting [ON] or [OFF]. ON: The BASIC file storage area is not allocated and the existing data are retained.
  • Page 44  [Memory Format] You can delete the currently stored data in the specified memory. [Location] Selects the memory to be formatted. Default Onboard Flash Memory Options Onboard Flash Memory [Area] Selects the area to be formatted. Default PC Save & Bitmap External Character PC Save &...
  • Page 45  [Maintenance Counter Clear] You can clear the counter information. [Maintenance Counter Clear] Selects the option to clear the maintenance counter. Default All Counter Options All Counter, Feed Distance (FEED), Print Distance (PRINT)
  • Page 46  [Parameter Clear] You can clear the parameter according to the destination. [Destination] Selects the destination used after the parameter clearing is performed. Default Options QM, JA, CN...
  • Page 47  [Head Check] You can check a print head broken element. If a broken element is detected, the printer will suffer from an error after the head check has finished. Clicking [Printer Reset] restores the printer to the idle state. ...

  • Page 48: [Test Print]

    [Test Print] You can perform a test print on the specified conditions. Slant Lines (1 dot) Slant Lines (3 dot) Characters Barcodes [Print Pattern] group [Print Pattern] Selects a print pattern for the test print. Default Slant Lines (1 dot) Options Slant Lines (1 dot), Slant Lines (3 dot), Characters, Barcodes [Resolution]...
  • Page 49 [Print Condition] group [Issue Count] Sets the number of prints. Default 0001 Range 0001 to 9999 [Print Speed] This setting cannot be changed. [Sensor] Selects a sensor to be used. Default None None, Reflective, Transmissive, Transmissive (Preprinted Labels), Options Reflective (Manual) [Issue Mode] This setting cannot be changed.
  • Page 50 TOSHIBA TEC CORPORATION 1-11-1, Osaki, Shinagawa-ku, Tokyo 141-8562 Gate City Ohsaki West Tower ©TOSHIBA TEC CORPORATION 2020 All rights reserved.

Table of Contents