Toshiba B-EX Series Key Operation Specification page 45

Menu operation example
Display Procedure
Turn on the printer while holding down [FEED] and [RESTART] keys
at the same time.
SYSTEM MODE menus are displayed.
Select <1>DIAG. and press [ENTER] key.
Submenus of <1>DIAG. are displayed.
Select MAINTENANCE CONT and press [ENTER] key.
Submenus of MAINTENANCE CONT are displayed.
Select PRINT TYPE and press [ENTER] key.
PRINT TYPE menu is displayed.
Select either print method.
When [ENTER] key
MAINTENANCE CONT menu.
Press [DOWN] key, select CUT TYPE, and press [ENTER] key.
CUT TYPE menu is displayed.
Select OFF or ON for CUT TYPE.
When [ENTER] key
MAINTENANCE CONT menu.
Press [DOWN] key, select CHECKING & PRINT, and press
[ENTER] key.
The maintenance counter and self-diagnosis result are printed.
While printing ...
"PRINTING" is displayed.
When the printing normally ends:
The display returns to MAINTENANCE CONT menu.
When a print error occurs:
The printer stops printing displaying the error message.
The ERROR LED turns on and the ONLINE LED turns off.
The display returns to MAINTENANCE CONT menu when [ENTER]
or [CANCEL] key is pressed. At this time, the ERROR LED turns
off and the ONLINE LED turns on.
Note that the printer does not automatically re-print the erroneous
label after recovery from the error.
is pressed, the
is pressed, the
40
display returns to
display returns to