Auto Diagnostic - Toshiba B-EX Series Key Operation Specification

8.3.2 AUTO DIAGNOSTIC

The procedure for printing the self-diagnosis result is the same as that for the maintenance counter data. 8.3.1
MAINTENANCE CONT.
The following table shows the menu structure from top menu of the system mode to AUTO DIAGNOSTIC.
MENU ITEM
SYSTEM MODE
<1>DIAG.
AUTO DIAGNOSTIC
When an error occurs while printing, the error message is displayed, the ERROR LED turns on, and the
ONLINE LED turns off. Though the error can be cleared by presing [ENTER], [CANCEL] or [MODE] key, the
printer does not print the erroneous label.
PRINT TYPE
TRANSFER
DIRECT
CUT TYPE
OFF
ON
CHECKING & PRINT
Display pattern and key operation
7.1 LIST BOX WITH
SCROLLBAR
7.3 INFORMATION DISPLAY
52