User System Mode; Outline Of User System Mode - Toshiba B-EX Series Key Operation Specification

9 USER SYSTEM MODE

9.1 OUTLINE OF USER SYSTEM MODE

The printer enters the user system mode when the following operation is performed from the online state.
Press the [PAUSE] key to place the printer in pause state, then hold down the [PAUSE] key.
・
Hold down the [MODE] key.
・
The user system mode is intended for performing parameter and other settings.
The key operations for the user system mode are described below.
Key operations follow Section 7.1 LIST BOX WITH SCROLLBAR.
Display
Top menu for QM/CN model
English
<1>RESET
<2>PARAMETER SET
<3>ADJUST SET
<4>LAN/WLAN
<5>BASIC
<6>Z-MODE
<7>AUTO CALIB
<8>DUMP MODE
<9>LOG
<1>RESET
<2>PARAMETER SET
<3>ADJUST SET
<4>LAN/WLAN
<5>BASIC
<6>Z-MODE
<7>AUTO CALIB
<8>DUMP MODE
<9>LOG
Same as 8.16 RESET of the system mode.
Same as 8.4 PARAMETER SET of the system mode
Same as 8.5ADJUST SET of the system mode
Used to enable or disable the network device. The detailed settings for the
network need to be done in the system mode.
Same as 8.10 BASIC of the system mode
Same as 8.14 Z-MODE of the system mode
Used to enable or disable the auto calibration function.
Used to print or save the data sent from the host in USB memory.
Used to save print logs in USB memory
129