Download  Print this page

Setup Procedure; Requirements For Operation; Setting Up The Printer - Toshiba TEC B-450-HS-QQ Series Owner's Manual

Toshiba owner's manual label printer b-450-hs-qq.
Hide thumbs

Advertisement

5. SET UP PROCEDURE
5. SET UP PROCEDURE

5.1 REQUIREMENTS FOR OPERATION

This machine has the following requirements:
The host computer must have a serial port or centronics parallel port.
To communicate with host, either an RS-232C cable or Centronics cable is required.
(1) RS-232C cable .......... 9 pins
(2) Centronics cable ....... 36 pins
To print a label format, create the complete program using the interface/communication manual or use
a bespoke labelling package or Windows Driver.
Interface Cables
To prevent radiation and reception of electrical noise, the interface cables must meet the following
requirements:
Fully shielded and fitted with metal or metalised connector housings.
Kept as short as possible.
Should not be bundled tightly with power cords.
Should not be tied to power line conduits.
RS-232C Cable description
The serial data cable used to connect the printer to the host computer should be one of the following two
types:
NOTE: Use an RS-232C cable with imperial (inch) connector securing screws.
DB-9S
Connector to PC
PIN No.
1
2
3
4
5
6
7
8
9
Housing
DB-25S
Connector to PC
PIN No.
1
2
3
4
5
6
7
20

5.2 SETTING UP THE PRINTER

Place the printer on a flat, stable surface.
Use a grounded electrical outlet do not use adapter plug.
Be sure there is adequate room around the printer for easy operation and maintenance.
Keep your work environment static free.
Signal
N.C.
RXD
TXD
DTR
GND
DSR
RTS
CTS
N.C.
Shield
Signal
Shield
TXD
RXD
RTS
CTS
DSR
GND
DTR
5-1
5.1 REQUIREMENTS FOR OPERATION
DB-9P
Connector to Printer
PIN No.
Signal
1
N.C.
2
TXD
3
RXD
4
DSR
5
GND
6
DTR
7
CTS
8
RTS
9
N.C.
Housing
Shield
DB-9P
Connector to Printer
PIN No.
Signal
1
N.C.
2
TXD
3
RXD
4
DSR
5
GND
6
DTR
7
CTS
8
RTS
9
N.C.
EO1-33019
Fig. 5-1

Advertisement

Table of Contents

   Related Manuals for Toshiba TEC B-450-HS-QQ Series

This manual is also suitable for:

Tec b-452-hs12-qqTec b-452-hs12-qq-us

Comments to this Manuals

Symbols: 0
Latest comments: