Toshiba B-EX Series Key Operation Specification page 123

8.12.3.1 ADJ RETRY POSITION
If writing data on a tag failed, the printer feeds the RFID tag forward or backward for specified length, in
order to retry data write. When "0" is set for this parameter, this function and a retry are not performed.
Only the value of -3mm or less or +3mm or more is effective.
Max. Min. value
value
99 -99
8.12.3.2 ISSUE RETRY LABLES
When issuing an RFID tag failed, the printer prints the error (Void) pattern, and retries to issue the tag for
up to specified number of times. If the printer does not succeed even after having retried for the max.
number of times, the printer stops, resulting in an error.
Max. Min. value
value
255 0
8.12.3.3 READ RETRY
The number of times tag read is retried and the timeout for read retry are set.
The printer retries to read the data in an RFID tag for up to specified number of times. If the timeout
period expired before the max. number of retries have been done, the printer stops the retries at the time.
Whenever the printer writes data onto an RFID tag, the tag is read first. The max. number of retries set by
this parameter becomes also effective in this pre-read.
Max. Min. value
value
255 0
The timeout for RFID tag read retry is set.
If the printer has retries for the max. number of times within the RFID read retry timeout, the printer stops
the retries at the time. Whenever the printer writes data onto an RFID tag, the tag is read first. The read
retry timeout set by this parameter becomes also effective in this pre-read.
Max. Min. value
value
9.9 0.0
Step Display
1 Decimal
Step Display
1 Decimal
Step Display
1 Decimal
Step Display
0.1 Decimal
Sign Integer
digit
None 2
Sign Integer
digit
None 3
Sign Integer
digit
None 3
Sign Integer
digit
None 1
118
Decimal 0-padding
place
0 None
Decimal 0-padding
place
0 None
Decimal 0-padding
place
0 None
Decimal 0-padding
place
1 None
Unit of
measure
mm
Unit of
measure
Labels
Unit of
measure
Times
Unit of
measure
Second