Rbn Adj.<Fw; Rbn Adj.<Bk; Threshold <Refl; Threshold <Trans - Toshiba B-EX Series Key Operation Specification

8.5.7 RBN ADJ.<FW>
Max. Min. value
value
10 -15
The fine adjustment value is not effective for the reverse rotation.
The fine adjustment value for the ribbon take-up motor is limited depending on the print speed.
Print speed
Fine adjustment value
8.5.8 RBN ADJ.<BK>
Max. Min. value
value
10 -15
The fine adjustment value is not effective for the reverse rotation.
All fine adjustment values are applicable to every print speed.
8.5.9 THRESHOLD <REFL.>
Max. Min. value
value
4.0 0.0
NOTE: If "0.0 V" is set, the value "0.0 V" is returned to the initial value (1.0 V) when the power is turned OFF
then ON.
8.5.10 THRESHOLD <TRANS.>
Max. Min. value
value
4.0 0.0
NOTE: If "0.0 V" is set, the value "0.0 V" is returned to the initial value (1.4 V) when the power is turned OFF
then ON.
Supplementary explanation
• When the [RESTART] and [FEED] keys are pressed at the same time, the display returns to the system
mode menu.
• When the [RESTART] or [FEED] key is held down for 0.5 seconds or more when a fine adjustment value
is being set, the printer enters the repeat mode, in which the key is entered repeatedly.
• A changed fine adjustment value is stored in memory by pressing the [PAUSE] key.
Step Display
1 Decimal
All speeds 8 ips or less
-15 to 0
Step Display
1 Decimal
Step Display
0.1 Decimal
Step Display
0.1 Decimal
Sign Integer
digit
Exist 2
6 ips or less
+1 to +5 +6 to +10
Sign Integer
digit
Exist 2
Sign Integer
digit
None 1
Sign Integer
digit
None 1
83
Decimal 0-padding
place
0 None
Decimal 0-padding
place
0 None
Decimal 0-padding
place
1 None
Decimal 0-padding
place
1 None
Unit of
measure
Step
Unit of
measure
Step
Unit of
measure
V
Unit of
measure
V