Usb To Printer; Printer To Usb - Toshiba B-EX Series Key Operation Specification

8.15.1 USB TO PRINTER

・ COPIED DATA
・ CONFIG FILE
The data store in USB memory is copied to the printer.
• COPIED DATA
• CONFIG FILE
After an item to be saved is selected, the file selection display is shown.
For the file selection display, see Section 7.6 File Selection Display.
(The scrollbar on the file selection display is not provided with the knob regardless of the number of files.)
The confirmation display appears when a file is selected from the file selection display.
(When CFG files is selected, the message included in the CFG file is shown prior to the confirmation
display.)
After confirming the data copy, the printer reads data from USB memory.
It takes about 3 to 5 minutes to read all information.
When the error occurs during an access to the USB memory, the error message described in Section 8.15
USB MEMORY is displayed.
The printer does not retry the operation.

8.15.2 PRINTER TO USB

・ ALL
Printer copies firmware (BOOT/MAIN/CG/KANJI/HTML), storage area information, and parameter settings
to a USB memory.
After an item to be saved is selected, the confirmation display is shown and the data is stored in the USB
memory.
It takes about 40 seconds to copy all information.
A file is automatically created in the USB memory and named in the following format based on the printer
model and saved date.
/ATA0/SYSTEM/B-EX4T1-T1105.DAT (e.g. B-EX4T Type1 305dpi model, the 11th Nov.)
If a file with the same name already exists in the USB memory, it will be overwritten.
When the error occurs during an access to the USB memory, the error message described in Section 8.15
USB MEMORY the operation.
File (*.DAT) containing firmware (BOOT/MAIN/ CG/KANJI/HTML), storage area
information, and parameter settings
The file is created in binary format when "PRINTER TO USB" is executed.
File (*.CFG) in which the path of the firmware (BOOT/MAIN/ CG/KANJI/HTML) is
saved
The file is created in text format when the master media is made. The format of
the file is described in Section 11.Auto Configuration Mode.
127