Download  Print this page

Top Margin Adjustment - Adjustment Or Setting Mode; Top Margin Adjustment For Label - Adjustment Or Setting Mode; Black Mark Cut Position Adjustment - Adjustment Or Setting Mode; Label Cut Position Adjustment - Adjustment Or Setting Mode - Toshiba DB-EA4D Command Manual

Double-sided label printer.
Hide thumbs

Advertisement

2.2.20 Top margin adjustment - Adjustment or setting mode

ASCII:
GS d 10H n
Hexadecimal:
1D 64 10 n
Decimal:
29 100 16 n
F1 ≤ n ≤ 0F (@1/203")
Range of n:
This command performs top margin adjustment test. If there are any printable data when the printer
receives this command, the printer prints out previous data. After that, the printer performs this command.
This command should be sent to the printer separately.

2.2.21 Top margin adjustment for Label - Adjustment or setting mode

ASCII:
GS d 11H n
Hexadecimal:
1D 64 11 n
Decimal:
29 100 17 n
F1 ≤ n ≤ 0F (@1/203")
Range of n:
This command performs top margin adjustment test for Label. If there are any printable data when the
printer receives this command, the printer prints out previous data. After that, the printer performs this
command. This command should be sent to the printer separately.

2.2.22 Black mark cut position adjustment - Adjustment or setting mode

ASCII:
GS d 12H n
Hexadecimal:
1D 64 12 n
Decimal:
29 100 18 n
F1 ≤ n ≤ 0F (@1/203")
Range of n:
This command performs black mark cut position adjustment test. If there are any printable data when the
printer receives this command, the printer prints out previous data. After that, the printer performs this
command. This command should be sent to the printer separately.

2.2.23 Label cut position adjustment - Adjustment or setting mode

ASCII:
GS d 13H n
Hexadecimal:
1D 64 13 n
Decimal:
29 100 19 n
F1 ≤ n ≤ 0F (@1/203")
Range of n:
This command performs label cut position adjustment test. If there are any printable data when the printer
receives this command, the printer prints out previous data. After that, the printer performs this command.
This command should be sent to the printer separately.
17
DB-EA4D Command manual (rev.00)

Advertisement

Table of Contents

   Also See for Toshiba DB-EA4D

   Related Manuals for Toshiba DB-EA4D

Comments to this Manuals

Symbols: 0
Latest comments: