Key Digital KD-IP1080Tx Manual page 20
Network switches for use with key digital enterprise av - hd over ip systems
Hide thumbs
Also See for KD-IP1080Tx:
- Operating instructions manual (10 pages) ,
- Manual (119 pages) ,
- Manual (116 pages)
Advertisement
13. Navigate to Administration -> Management Interface -> IPv4 Interface. Select "1" under Management
VLAN. Select Static for IP Address Type. Change an IP address to 192.168.1.251. If you are using multiple
network switches it is recommended to set first one to 192.168.1.251, second to 192.168.1.252, and so on.
Leave Network Mask as 255.255.255.0, set Administrative Default Gateway as User Defined and enter
your router IP address (in this case: 192.168.1.1), then click Apply.
14. Click OK to confirm.
20 |
P a g e
Advertisement
