Port. (IP922 requires Jumbo Frame(8K) for video/audio transmission via 1G-BaseT). Make sure under Port
Settings, Port field is set to All. Then enter "9216" in Maximum Receive Frame Size field as shown below and
press Apply button. After applying check that the settings are updated in the table below.
8. To enable IGMP Snooping of the switch, go to Configure -> Application -> IGMP Snooping. (IP922 requires
IGMP Snooping for multicasting video/audio transmission via 1G-BaseT), Enable IGMP settings as shown
below and press Apply button. You should see a new entry in the table below.
72 |
P a g e