Key Digital KD-IP1080Tx Manual page 62
Network switches for use with key digital enterprise av - hd over ip systems
Hide thumbs
Also See for KD-IP1080Tx:
- Operating instructions manual (10 pages) ,
- Manual (119 pages) ,
- Manual (116 pages)
Advertisement
18. Navigate to Maintenance -> File Management -> Configuration File Copy. Select radio buttons as shown
below, click Apply. This will save current configuration and will apply this configuration every time switch is
powered up.
19.
IMPORTANT:
Now you can connect back you DHCP equipment (routers, servers and so on).
20. Power down Linksys network switch and power it up back again. Wait for the whole system to start and until
you can see video on your displays.
21. Log in to your Linksys network switch again and make sure that IGMP settings are intact:
62 |
P a g e
Advertisement
