Key Digital KD-IP1080Tx Manual page 47

6. On the left select Switch. Navigate to System -> IP Settings -> IPv4. Under Auto Configuration select Static.
Change an IP address to 192.168.1.250, Subnet Mask to 255.255.255.0, Default Gateway to 192.168.1.1 (in
this case), and at the bottom click Apply.
7. Page will refresh. Configure your PC's IP address to the same range as the switch (default 192.168.1.xxx).
Enter the switch's IP address (default is 192.168.1.250) in your browser and press ENTER. Log in again with
the same user name /password.
8. On the left select Switch. Navigate to L2 Feature -> IGMP Snooping -> Global Settings. Under Status select
Enabled, under Version: V2 and under Report Suppression: Enabled. Click Apply.
47 | P a g e