Key Digital KD-IP1080Tx Manual page 51

11. Navigate to Configuration -> IP Interface -> IPv4-> IPv4 Interface. Select Static IP Address. IP address can be
changed by the administrator depending on the network configuration. If you are using multiple network
switches it is recommended to set first one to 192.168.1.251, second to 192.168.1.252, and so on (we will
leave the IP address unchanged). Set Subnet Mask to 255.255.255.0, set User Defined Default Gateway to
192.168.1.1 (in this case), make sure that Management VLAN is set to"1" and click Apply. If you changed an
IP address page will refresh and you will need to log in again using new IP address, same user name and
password. If you did not change IP address just continue to the next step.
12. Make sure your screen looks exactly like pictured below.
51 | P a g e