Key Digital KD-IP1080Tx Manual page 65

Network switches for use with key digital enterprise av - hd over ip systems

Hide thumbs Also See for KD-IP1080Tx:

Netgear GS Series

Network Setup Guide for KD-IP922, KD-IP1080

1. Plug an Ethernet cable into any of the ports of the witch

2. Plug the other end into the Ethernet port of your computer

3. Power on the Switch

4. Check to see that the IP address of the computer is within this network, 192.168.0.xxx ("xxx" ranges 1~254).

For example, 192.168.0.100

65 |

P a g e

Kd-ip922dec Kd-ip922enc Kd-ip1080rx Kd-ip120tx Kd-ip120rx Kd-ip120poetx ... Show all