Key Digital KD-IP1080Tx Manual page 24

20. Click on a radio button on the left and then click Edit. New window will appear. Select "1" for VLAN ID.
Check Enable box under IGMP Snooping Status. Check Enable box under Immediate Leave. Check Enable
box under IGMP Querier Status. Select User Defined next to Administrative Querier Source IP Address:
and select 192.168.1.1. For IGMP Querier Version: select IGMPV3. Then click Apply and Close. Make sure
all the setting are exactly as shown at the picture below.
21. IMPORTANT: At this point all the displays should be displaying stable running video from the selected
sources. If you do not have them displaying properly, than network switch is configured incorrectly.
22. On the top of the page click on flashing "x Save". For Source File Name: select Running configuration. For
Destination File Name: select Startup configuration. Check the selections and make sure they are exactly
as shown below. Click Apply.
24 | P a g e