Key Digital KD-IP1080Tx Manual page 44

Network IP Settings:
14. Find L3 Features -> Interface -> IPv4 Interface. Select "Edit" button.
This D-Link switch series can be set to IP address range 10.x.x.x. ONLY.
If you use a single network switch, you may not need to change network IP settings. But if you are stacking network
switches (connecting multiple network switches through D-Link 10G fiber cables), it is recommended to set first on
to 10.90.90.91, second to 10.90.90.92, and so on.
Set Get IP From "Static", set Subnet Mask to 255.0.0.0 and click Apply.
If you change an IP address, the page will be refreshed and you will need to log in again using new IP address, same
user name and password. If you did not change IP address just continue to the next step. Make sure your screen
looks exactly like pictured below.
44 | P a g e