Key Digital KD-IP1080Tx Manual page 16
Network switches for use with key digital enterprise av - hd over ip systems
Hide thumbs
Also See for KD-IP1080Tx:
- Operating instructions manual (10 pages) ,
- Manual (119 pages) ,
- Manual (116 pages)
Advertisement
15.
IMPORTANT:
At this point all the displays should be displaying stable running video from the selected
sources. If you do not have them displaying properly, then network switch is configured incorrectly.
16. Navigate to Maintenance -> Restart Device and click Restart Switch. After switch is rebooted and back to
normal log in again, check all the settings again.
17.
IMPORTANT:
Now you can connect back you DHCP equipment (routers, servers and so on).
18. Power down Araknis network switch and power it up back again. Wait for the whole system to start and
until you can see video on your displays.
19. Log in to your Araknis network switch again and make sure that IGMP settings are intact.
20. Rescan your components with Key Digital KD-IP120 Key Digital Management Software and make sure HDMI
video switch is functional.
21. At this point your Araknis network switch is set and ready to use.
16 |
P a g e
Advertisement
