Key Digital KD-IP1080Tx Manual page 31

Note. Please do not click "Submit" button in this step.
Step 12 Select the Advanced Settings tab on the Express Setup window

In the Telnet Access field, click Enable to use Telnet to manage the switch by using the command-
line interface (CLI). If you enable Telnet access, you must enter a Telnet password.

In the Telnet Password field, enter a password. The Telnet password can be from 1 to 25
alphanumeric characters, is case sensitive, allows embedded spaces, but does not allow spaces at
the beginning or end. In the Confirm Telnet Password field, reenter the Telnet password.
And click Submit to save your changes and to complete the initial setup.
31 | P a g e