Managing Device Setups; Saving A Default User Setup; Resetting To Default User Setup; Resetting To Factory Default - ABB LWT300 series User Manual

Managing device setups

Configuring or reconfiguring your instrument could take a non trivial amount of time. With that in mind,
once you have properly configured your instrument, you can save your setup as a baseline configuration
that you can revert to if necessary. The following pages explain how to proceed.

Saving a default user setup

To save your current configuration as your default user setup:
1 Select Device Setup > Save Setup & reset > Save as User Default.
2 Press OK. Your current setup is saved in the instrument non-volatile memory.

Resetting to default user setup

Provided that you have already saved a setup as your default setup, you can return to that default user
setup at any time.
To do so:
1 Select Device Setup > Save Setup & reset> Reset to User Default.
2 Press OK. Your current setup is erased and replaced with the default user setup.

Resetting to factory default

Should you be in a situation where the default user setup does not work anymore (e.g., you have moved
the LWT instrument to a new vessel), you can simply revert to the factory default setup and start
configuring your instrument anew.
To do so:
1 Select Device Setup > Save Setup & reset. > Global Factory Reset.
2 Press OK. Your current setup is erased and replaced with the default factory setup.
57
Configuring the instrument