Total Run Time; Accessing Device Information - ABB LWT300 series User Manual

Guided wave radar level transmitter

Hide thumbs Also See for LWT300 series:

Table of Contents

Resetting the minimum/maximum electronics temperature recorded

To reset the minimum and maximum electronics temperature recorded:

1 Select Diagnostics > Device Status > Electronic Temp. > Reset Min/Max.

2 Press OK to reset the values.

3 Press Back to return to the Device Status menu.

Total run time

To confirm the total instrument run time:

1 Select Diagnostics > Total Run Time.

The total run time of the instrument is indicated.

2 Press Back to return to the Device Status menu.

When calling an ABB service representative, you might be asked to provide any of the following

information, available from the Device Info menu:

—

Figure 47 The Device Info menu

• Manufacturer

• Name

• Model

• Device ID

• Device Serial number

• Order code

• Manufacturing date

• Installation date

• Last modify date

• Address

• City

• Phone number

• Hardware revision

• Software revision

Maintenance and troubleshooting

Table of Contents