—
Figure 10 Four positions for the instrument LCD
0° (default)
5 Push back the display module on the communication board, making sure that the four plastic locks
are properly fixed.
NOTICE
Be careful not to bend the connection pins (see Figure 11) when pushing the display
back in.
—
Figure 11 Connection pins on back of LCD board
Connection pins
6 Hand tighten the housing cover back in place.
NOTICE
For Ex d and/or flameproof installations, see note "Securing housing cover in
flameproof/explosion proof areas" on page 25.
+90°
+180°
Plastic locks
Installing the LWT
+270°
21