Upon Startup - ABB LWT300 series User Manual

Guided wave radar level transmitter

Hide thumbs Also See for LWT300 series:

Table of Contents

Upon startup

Upon startup, the LCD turns on, the instrument establishes connection and the display starts showing

values on Operator page 1 based on the factory-set configuration.

NOTICE

After power-on, wait for the LCD calibration process to complete (±30 seconds) before

operating the TTG display.

—

Figure 15 Instrument LCD on power-up

—

Figure 16 Initial Operator page with values based on default configuration

NOTICE

During the boot process, no level information is displayed.

For more information on Operator pages, see "Configuring Operator pages" on page 39.

The next chapter introduces the standard instrument user interface: the liquid-crystal display (LCD).

Installing the LWT

Table of Contents