—
C h a p t E R 6
Configuring the instrument
Once the LWT instrument is physically installed and properly powered, you might need to configure the
various parameters to better suit your needs if they go beyond the default configuration. The following
pages explain how to configure these various parameters.
Configuring the display
You set all LCD-specific parameters from the Display configuration menu.
—
Figure 23 Display menu
Language
To set language in which the interface is displayed:
1 Select Display > Language.
2 From the Language menu, highlight the language in which you want to display the interface.
English is selected by default, but you can also select German (Deutsch), French (Français) or
simplified Chinese (中文).
3 Press OK.
Contrast
To set the display contrast:
1 Select Display > Contrast.
2 Press the Up or Down arrow key to increase or decrease the contrast percentage.
By default, the contrast is set to 50%.
3 Press OK.