Managing Saved Linearization Tables - ABB LWT300 series User Manual

Managing saved linearization tables

You can clear an existing linearization table if you want to start from scratch (e.g., if you moved
your instrument to a different tank) and you can restore the existing table if you want to erase the
linearization table under development and reload the saved table.
Deleting the linearization table
To delete the saved linearization table that you just created (see above):
1 Select Device Setup > Linearization > Saved Tables > Clear.
2 Press OK. Your linearization table is erased.
NOTICE
Clearing the linearization table deactivates all volume measurements settings.
Restoring a linearization table
To restore your saved linearization table:
1 Select Device Setup > Linearization > Saved Tables > Restore.
2 Press OK. Your saved linearization table is restored.
56
User Guide