Installation Of The Mixed-Mail Feeder (Optional) - Neopost IJ-80 User Manual

1.2.4 Installation of the mixed-mail feeder (optional)

The mixed-mail feeder operates with an optical sensor
next to the feed platform. Thus, it should not be installed
in an area exposed to any excessive light source.
- Align as much as possible the feeder with the franking machine;
- Push the feeder towards the franking machine (or the dynamic
scale), taking care to keep the alignment using the centering
pin;
- Insert the feeder screw into the franking machine (or the dynamic
scale), then using the knob, tighten while pressing the screw to
lock it (if the units are not properly brought close together, gently
turn the gear protruding from the feeder and repeat the procedure):
tightening knob (on the side)
22 Overall presentation
centering pin
(gear)