Printing Inker Servicing - Neopost IJ-80 User Manual

The machine is supplied with DEPARTMENT
order to use the departments, select DEPARTMENT
(by touching it). Validate with
ON
then select DEPARTMENT in the main supervisor menu
to open and define the departments you want to use (see
on previous page).
The machine is configured by default as follows:
- with 0000 code for all departments opened by the supervisor,
- with names from D1 to D49 corresponding to n° 1 to 49 for IJ 80, and
from D1 to D199 corresponding to n° 1 to 199 for IJ 90 and IJ 110.
In the "no department" mode, all the values are assigned to a
dummy department (D0 MISCELLANEOUS) which cannot be
accessed by the user. This department will be reset with the other
ones, when the registers are cleared. This department appears
on the printed reports.

4.6 Printing inker servicing

- From the main menu, select "PRINTING INKER SERVICING";
the screen displays:
ALIGN.
HOME
- Load short labels (in preference) and select
machine prints a test impression:
PRINTING INKER
A C E
B D
Click on Print,
Select the appropriate letter
And click OK to validate.
LOGOUT
OK
POSTA...
DEPAR...
G I K
F H J
PRINT
Supervisor Mode 107
; in
OFF
. You should
SUP
OK
; the
PRINT