Installation - Parmco OX-1-6S-5 Installation And Operating Instructions Manual

Installing the oven
The kitchen should be dry and have effective ventilation according to the existing
technical provisions
Main lead behind the oven must be placed in such manner to avoid touching the
back panel of the oven because of the heat it develops during operation
Remove any packaging materials (foils, artificial foam, nails, etc.) from the reach of
children, because they represent potential danger. Children may swallow small parts,
or suffocate with foils.
This is a built-in oven, which means that its back wall and one side wall can be placed
next to a high piece of furniture or a wall. Coating or veneer used on fitted furniture
must be applied with a heat resistant adhesive (100℃), this prevents surface
deformation or detachment of the coating. If you are unsure of your furniture's heat
resistance, you should leave approximately 2cm of free space around the oven. The
wall behind the oven should be resistant to high temperatures. During operation its
back side can warm up to around 500℃ above the ambient temperature.
Make an opening with the dimensions given in the diagram for the oven to be fitted
The appliance must be earthed.
Insert the oven completely into the opening without allowing the four screws in the
places shown in the diagram to fall out.

INSTALLATION

23