Installation Instructions - Parmco PPOV-6S-DT-2 Installation And Operating Instructions Manual

Table of Contents

Advertisement

INSTALLATION INSTRUCTIONS

 Installation of this appliance and its connection to the electrical mains must only be
carried out by authorised personnel. Before any service procedure, it is important to
ensure that the appliance is DISCONNECTED from the electrical mains.
 DO NOT MODIFY THIS APPLIANCE.
 After removing the appliance from the packaging, make sure that it is undamaged.
Otherwise, contact your dealer before installing this appliance.
 Make sure that this appliance is installed in accordance with the ventilation
requirements.
NOTES TO THE AUTHORISED INSTALLER
 Data Label
The data label is located at the rear of the appliance. A duplicate data label is supplied
to adhere to a suitable accessible area next to the appliance. The data label on the
appliance must NEVER be removed.
Before any procedure, it is important to check that the appliance is DISCONNECTED
from the electrical mains. Parmco declines all responsibility for any damage deriving
from installations that are in breach of the regulations in force or from failure to comply
with these installation instructions.
The appliance comes fitted with an approved cord which may be connected to a
correctly earthed socket outlet. It is necessary that all installation and connections are
carried out by qualified personnel and that the connections meet all New Zealand
Regulatory Requirements.
Before connecting to the mains make sure that:
 The electrical counter, the safety valve, feed cable and socket are suitable to
withstand the maximum load requirements as detailed on the rating label.
 The supply system is regularly grounded as per New Zealand Regulations
 The socket or omnipolar switch can easily be reached after the appliance is
installed.
 After connection of the appliance to the mains, ensure the cord does not come into
contact with any parts of this appliance subject to heating.
 Never use reductions, shunts, adaptors which can cause overheating or burning.
ELECTRICAL CONNECTION
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents