Parmco OX-1-6S-5 Installation And Operating Instructions Manual page 22

Caution
Do not use cleaning products containing abrasive materials for the cleaning and
maintenance of the glass front panel.
Replacement of the oven light Bulb
Before any maintenance is started involving electrical parts, the appliance must be
disconnected from the power supply.
If the oven has been in use, let the oven cavity and the heating elements cool down
before attempting any maintenance.
Changing the bulb
Pull out the protective cover. We recommend that you wash and dry the glass
cover at this point.
Carefully remove the old bulb and insert the new bulb suitable for high
temperatures (300ºC) having the following specifications: 220-240V, 50Hz, 25W, G9
fitting. Refit the protective cover.
IMPORTANT
Never use screwdrivers or other utensils to remove the light cover.
This could damage the enamel of the oven or the lamp holder. Remove only by
hand
IMPORTANT
Never replace the bulb with bare hands as contamination from your fingers can
cause premature failure. Always use a clean cloth or gloves.
Please note:
The bulb replacement is not covered by your guarantee
Door removal
In order to obtain easier access to the oven chamber for cleaning, it is possible to
remove the door.
To do this, tilt the safety catch part of the hinge upwards. Close the door lightly, lift
and pull it out towards you. In order to fit the door back on to the cooker do the
reverse. When fitting, ensure that the notch of the hinge is correctly placed on the
protrusion of the hinge holder. After the door is fitted to the oven, the safety catch
21