Installation Instructions - Parmco PPOV-6B-9 Installation And Operating Instructions Manual

Table of Contents

Advertisement

INSTALLATION INSTRUCTIONS

 Installation of this appliance and its connection to the electrical mains must only be
carried out by authorised personnel. Before any service procedure, it is important to
ensure that the appliance is DISCONNECTED from the electrical mains.
 DO NOT MODIFY THIS APPLIANCE.
 After removing the appliance from the packaging, make sure that it is undamaged.
Otherwise, contact your dealer before operating this appliance.
 Make sure that this appliance is installed in accordance with the ventilation
requirements.
NOTES TO THE AUTHORISED INSTALLER
This appliance shall only be installed by an authorised person. This appliance shall
only be installed in complete accordance with the Electrical Standards of New Zealand.
All local regulations, building code requirements and all other statutory requirements
must be met.
Data Label
The data label is located at the rear of the appliance. A duplicate data label is supplied
to adhere to a suitable accessible area next to the appliance. The data label on the
appliance must NEVER be removed.
Before any procedure, it is important to check that the appliance is DISCONNECTED
from the electrical mains. Parmco declines all responsibility for any damage deriving
from installations that are in breach of the regulations in force or from failure to comply
with these installation instructions.
ELECTRICAL CONNECTION
The appliance comes fitted with an approved 15 amp cord which may be connected to a
correctly earthed socket outlet. It is necessary that all installation and connections are
carried out by qualified personnel and that the connections meet all New Zealand
Regulatory Requirements.
Before connecting to the mains make sure that:
 The protection device, feed cable and socket are suitable to withstand the
maximum load requirements as detailed on the rating label.
 The supply system is regularly grounded as per New Zealand Regulations
 The omnipolar switch can easily be reached after the appliance is installed.
12

Advertisement

Table of Contents
loading

Table of Contents