Nexcom KPPC 1514B User Manual page 65

Chapter 4: BIOS Setup
Power Management
This section is used to configure the power management features.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
Power Management
Power Mode [ATX Type]
Power Saving(ERP) Control [Disabled]
Restore AC Power Loss [Last State]
Wake Events
RTC wake system from S5 [Fixed Time]
Wake up day
0
Wake up hour
0
Wake up minute 0
Wake up second 0
Resume from PME# [Enabled]
Resume from PCIE/RI [Enabled]
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Power Mode
Configures the power supply mode.
Power Saving(ERP) Control
Enables or disables power saving mode function.
Restore AC Power Loss
Select the AC power state when power is re-applied after a power failure.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
RTC wake system from S5
Enables or disables system wake up from S5.
Fixed Time:
Dynamic Time:
Select system power mode.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Resume from PME#
Enables or disables resume from PME# function.
Resume from PCIE/RI
Enables or disables resume from PCIE/RI function.
49
System will wake on the hr:min:sec specified.
System will wake on the current time + increase minute(s).
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
Power Management
[ATX Type]
Power Mode
Power Saving(ERP) Control [Disabled]
Restore AC Power Loss [Last State]
Wake Events
RTC wake system from S5
[Dynamic Time]
Wake up minute increase
1
Resume from PME# [Enabled]
Resume from PCIE/RI [Enabled]
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Note: USB does not support S3, S4 and S5 wake.
Fixed Time: System will wake
on the hr:min:sec
specified./n Dynamic Time:
System will wake on the current
time + Increase minute(s)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
KPPC 1514B/1814B/2114B User Manual