Nexcom KPPC 1514B User Manual page 60

Chapter 4: BIOS Setup
PCH-FW Configuration
This section is used to configure the firmware update settings.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
ME FW Version 11.0.0.1194
ME Firmware Mode Normal Mode
ME Firmware Type Full Sku Firmware
ME Firmware SKU Consumer SKU
Firmware Update Configuration
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Firmware Update Configuration
Enters the Firmware Update Configuration submenu.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
Firmware Update Configuration
Configure Management Engine
Technology Parameters
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Me FW Image Re-Flash
Enables or disables the ME firmware image re-flash function.
Local FW Update
Enables or disables the local firmware update function.
44
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
Me FW Image Re-Flash [Disabled]
Local FW Update [Enabled]
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Enable/Disable Me FW Image
Re-Flash function.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
KPPC 1514B/1814B/2114B User Manual