Nexcom KPPC 1514B User Manual page 59

Chapter 4: BIOS Setup
SATA Configuration
This section is used to configure the SATA device option settings.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
SATA Configuration
Empty
Serial ATA Port 0
Software Preserve Unknown
Port 0 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 1 Empty
Software Preserve Unknown
Port 1 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 3 Empty
Software Preserve Unknown
Port 3 [Enabled]
Hot Plug [Disabled]
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Port 0, Port 1 and Port 3
Enables or disables SATA port 0, port 1 and port 3.
Hot Plug
Enables or disables hot plugging feature on SATA port 0, port 1 and port 3.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
USB Configuration
This section is used to configure the USB.
Enable or Disable SATA Port
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Legacy USB Support
Enable Enables Legacy USB.
Auto
Disable Keeps USB devices available only for EFI applications.
XHCI Hand-off
This is a workaround for OSs that does not support XHCI hand-off. The
XHCI ownership change should be claimed by the XHCI driver.
43
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
USB Configuration
1 Keyboard
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Disables support for Legacy when no USB devices are connected.
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
KPPC 1514B/1814B/2114B User Manual