Connection With Ladder Editor For Windows - Hitachi HIDIC EH-150 Applications Manual

6.3 Connection with LADDER EDITOR for Windows®
You can program CPU module via EH-ETH with LADDER EDITOR for Windows®.
This chapter explains at the setting of EH-ETH and PC shown in table 6.3.2. The setting of EH-ETH is default
value. IP address of PC should be set at your network environment.
- Editing of Hosts file
Edit the file "host"(no extended code) in the directly (usually in ¥windows) which Windows95, 98 is installed
by the following process.
(1). To keep the current information, back up Hosts file.(Ex. Copy it as Hosts.org.)
(2). Open the file Hosts by notepad or other text editor.
(3). Type "Host IP address" and "Host name" which were set in EH-ETH to the last line. The host name must
be same as the host name at the environment setting of LADDER EDITOR for Windows®
CPU448C" as host name.
*1: Please types it carefully, because capital letter and small letter are distinguished.
192.168.0.128
Table 6.3.2 Setting
Setting Item
IP address 192.168.0.1
Subnet mask 255.255.255.0
Port number 3004
192.168.0.128 192.168.0.128 192.168.0.128 192.168.0.128 EHCPU448C EHCPU448C EHCPU448C EHCPU448C
EH-CPU448C
Chapter 6 Task code communication
EH-ETH PC
192.168.0.128
255.255.255.0
-
6-5
*
*1
. Here is "EH-